RW-F10.2 Low-Voltage Battery · 10.24 kWh
RW-F10.2
10.24 kWh / module
Wall- or floor-mounted 51.2 V LFP residential battery — 10.24 kWh per module from 200 Ah cells, 240 A nominal discharge. Stacks to 32 units (326 kWh), IP65, ≥6000-cycle life.
- Module energy
- 10.24 kWh (10.2 kWh usable)
- Nominal voltage
- 51.2 V
- Capacity
- 200 Ah
- Chemistry
- LiFePO4 (cobalt-free)
- Scalability
- Max. 32 in parallel (326 kWh)
- Peak discharge current
- 300 A (2 min, 25 °C)
- Cycle life
- ≥6000 (70% EOL)
- Warranty
- 10 years
Specifications
Module
- Battery chemistry
- LiFePO4
- Module energy
- 10.24 kWh
- Usable energy
- 10.2 kWh (100% DoD)
- Capacity
- 200 Ah
- Nominal voltage
- 51.2 V
- Operating voltage
- 43.2–57.6 V
- Dimensions (W×H×D)
- 600 × 760 × 200 mm
- Weight (approx.)
- 104 kg
- Built-in breaker
- 125 A 4P
System
- Rated DC power
- 6 kW (max. 12 kW)
- Charge / discharge current
- Recommend 100 A / 100 A · Nominal 198 A / 240 A · Peak discharge 300 A (2 min, 25 °C)
- Recommended DoD
- 100%
- Scalability
- Max. 32 pcs in parallel (max. 326 kWh)
General
- IP rating
- IP65
- Working temperature
- Charge 1–55 °C (−20–55 °C when heating on) · Discharge −20–55 °C
- Versions
- Without heating · With heating (two AU part numbers)
- Storage temperature
- 0–35 °C
- Altitude
- ≤3000 m
- Installation
- Wall-mounted, floor-mounted
- Communication port
- CAN 2.0, RS485
- Cycle life
- ≥6000 (25 °C ± 2 °C, 0.5C/0.5C, 70% EOL)
- Warranty period
- 10 years
- Certification
- UN38.3, IEC62619, CE, CEI 0-21, VDE2510-50
Highlights
- Cobalt-free LiFePO4 with built-in intelligent BMS (over-charge/discharge, over-current, temperature protection and cell balancing).
- 10.24 kWh per module from 200 Ah cells — 240 A nominal discharge (198 A charge) and a 300 A 2-minute discharge peak.
- Modular & expandable — up to 32 units in parallel for 326 kWh, for residential and commercial self-consumption.
- IP65, natural cooling with a wide −20 to 55 °C operating range; wall or floor mounting.
- 100% recommended DoD — the full 10.2 kWh is usable, which is what the federal battery rebate is calculated on.
- ≥6000 cycles (25 °C ± 2 °C, 0.5C/0.5C, 70% EOL) with a 10-year warranty; auto-networking modules with remote monitoring and upgrade.
Heated and non-heated versions
Deye’s Australian part list (10 September 2026) carries the RW-F10.2 under two part numbers, one without heating and one with heating. Without heating, the battery charges from 1 to 55 °C. The user manual gives a −20 to 55 °C charge range when heating is on. Discharge is −20 to 55 °C either way. The datasheet does not tell the two apart, so confirm which version is being supplied if the battery will charge in sub-zero conditions.
Figures are from the Deye RW-F10.2 (AU) datasheet linked above, revision 20251119 V1.0, the RW-F10.2 user manual (V1.4, charge range with heating on) and Deye’s Australian part list (10 September 2026, heated and non-heated versions). Usable energy is 10.2 kWh at 100% DoD. An earlier datasheet revision (20250213) stated 9.2 kWh at 90% DoD and has been superseded; if you are holding that one, check the date. Confirm the exact variant with Suncloud before quoting or commissioning.
Plan & design
Before anything is ordered — sizing, pairing and design decisions for the RW-F10.2 Low-Voltage Battery · 10.24 kWh.
Pairs with
Operate & configure
Monitoring, tariffs, work modes — getting the most out of the system after handover.
Documents
Everything published for the RW-F10.2 Low-Voltage Battery · 10.24 kWh — and where something is missing, it says so instead of hiding the row.
System & shared documents
Not specific to the RW-F10.2 Low-Voltage Battery · 10.24 kWh — these apply across the range and live here once, not copied per model.
