Design & rebate tools · Commercial & industrial
Size a commercial battery, and see what it earns back.
Pick the product range and the build. The bill of materials assembles itself with the inverter that matches, the federal battery rebate is calculated on the capacity the Clean Energy Regulator counts, and an indicative payback follows — anywhere in Australia. Tell it the project is in New South Wales and the PDRS certificates are added on top.
A business, a factory, a depot — anywhere in Australia. Racks and cabinets through to containers, 51 kWh to 5 MWh, with the federal rebate and an indicative payback. No account needed — every figure is computed from published rules.
Racks to containers
51.2 kWh – 5 MWh
Cabinets, outdoor racks and containerised BESS, with the inverter that matches each.
Federal rebate, Australia-wide
$6,647
Flat on every system at or under 100 kWh nominal · May–Dec 2026.
In NSW, certificates on top
+$14,640
4,800 PRCs on the 97.28 kWh build at $3.05/PRC — tell the tool the project is in NSW and it adds them.
Rebate figures are calculated from the federal battery rebate schedule, at $38.20/STC and the May–Dec 2026 factor, on systems at or under 100 kWh nominal. Certificate prices are traded and move; both are adjustable in the tool. Payback is indicative and excludes site-specific works. Estimates, not quotes.
Configure a system, watch the money
Pick the range and the build. The bill of materials, the rebate and the payback update as you go — every figure computed from the rule, not copied from a brochure.
Loading configurator…
Residential Configurator →
One home. Pick the inverter and the battery stack, and the parts list assembles itself with the exact orderable part codes and the federal rebate.
NSW PDRS Subsidy →
A NSW apartment block, business site or C&I facility. Count the certificates the build actually earns — and see where the rules quietly stop paying.
